WetaForum Home Forums Repairs and Maintenance Replacement Rudder Pintle Rod

This topic contains 0 replies, has 1 voice, and was last updated by Paul White Paul White 4 years, 7 months ago.

  • Author
    Posts
  • #627
    Paul White
    Paul White
    Keymaster

      If you accidentally drop your rudder pintle in deep water (tip – remove it on land!) you can get a replacement from a Stainless Steel Fabricator made from 316 Stainless Steel 210mm x 8mm. The pin holes at either end are 5mm from the end and 2.5 mm wide.

       

      • This topic was modified 1 year, 3 months ago by Paul White Paul White.
      • This topic was modified 1 year, 3 months ago by Paul White Paul White.
      Attachments:
      You must be logged in to view attached files.

    You must be logged in to reply to this topic.