- This topic has 1 reply, 2 voices, and was last updated 4 years, 1 month ago by .
I have an older boat and am interested in upgrading to the Ronstan continuous furler system. My concern is that to do this, I have to take the fairlead off the foredeck cam cleat. I am happy to do this, but the older hulls don’t have the deck hatch of the newer boats. I want to know if the bolts holding the cleats on are held captive by any mechanism? I dont want to undo them and have the nuts disappear into the hull never to be used again, and with no way of getting new nuts onto the job without cutting open the hull (which I don’t want to do).
Any thoughts from anyone??
- You must be logged in to reply to this topic.