WetaForum Home Forums Repairs and Maintenance Ronstan Series 60 Continuous Furler Maintenance

This topic contains 0 replies, has 1 voice, and was last updated by Paul White Paul White 9 months ago.

  • Author
  • #10309
    Paul White
    Paul White

      The Ronstan Series 60 Furler has sealed bearings but, unlike the KZ furler it replaced and the Harken continuous furler that superseded it, the Ronstan unit is always a bit stiff to unfurl and requires little tension on the furling line otherwise it won’t unfurl easily.

      There are some maintenance instructions here if you have problems getting the furler to release.


    You must be logged in to reply to this topic.